What are your performance mods???

[VCinVA]

What performance mods does everyone got, list them all here..

1998 GMC Sonoma 4.3L V6 4L60E Auto: :bow:
K&N FIPK II Intake, Hypertech Power Programmer 3, Hypertech 160 Degree Powerstat,
Casper Electronics TPS Tech, CFM Tech Throttle Body Blade, JBA Titanium Ceramic
Coated Cat4Ward Headers, Jacobs Electronics Off-Road Ignition Ultra Team, with Coil,
Jacobs Electronics 8.5mm Spark Plug Wires, March Underdrive Crank and Alternator Pulleys,
Flex-A-Lite Dual 12 Inch Electric Primary Fan (2500 cfm) with Thermo control Switch, B&M
Deep Cast Aluminum, Transmission Pan, Corvette Servo, Eaton 28 Spline Posi, Motive Gear
Installation Kit, US Gear 3.73:1 Ring and Pinion Gear Set.

Got a TransGO Performance Shift Kit, and full Energy Suspension Bushing kit ready to go in also..

[incudose]

K&N breather
Flexalite E-Fan
Flowmaster 40 with crazy turndown...
speed adhesive

[Rondog]

Lead foot

[Slamd_S_Dyme]

2.2 4 cyl - why bother.

[concreteSwell]

svt intake w/ k&n filter
h&r cup kit suspension
focus central race shifter
z-engineering lower motor mount

much more to come.

[c85jl]

k and n FIPK and exhaust...really not alot of mods out there for the 4.9 I6....

[lostalgic-s]

Custom intake with a stainless steel filter.
Removed fender wells for extra cooling. :clap:

[zypher]

On my 98:
K&N Intake FIPK Gen II
75mm Pro-M MAS
Flowmaster 40 Series
Apten Perfomance (http://www.apten-us.com) Dual Program ECU Chip

Waiting on Supercharger

[02sonoma]

CAI
Throttle body spacer (kinda dont count it)
Flowmaster w/turndown

[brewthru85]

Volant Cool-Air Intake and my right foot.

[KissMyEgo]

Cooper S rear sway bar.
The rest of my mods are cosmetic.

[Low4Life]

2.2 4 cyl - why bother.
lol, i hear ya... but i got a custom intake right now. gonna eventually get a K&N FIPK and maybe exhaust, but i dunno bout the exhaust.

[badblazerx]

flowmaster 40 series
hypertech reprogrammed
k&n gen II intake
removed screen from mass airflow sensor
thats about it...my truck is more show than go.

[1badasx]

K & N Intake, Flowmaster 40, pulleys, hypertech pp3, auburn gear limited slip, 4.10's

[phigity]

a/c revolution carbon fiber mufflers
custom bend 2.25" tubing from the cat back
place racing cold air intake
NOS nitrous (only purge for now)

[bigroy80]

mods, my vehicles are barley able to keep running when there stock

[lillitnn92]

custom cold air kit
crank pulley
electric fan
180° t-stat
MSD 6a
MSD Blaster coil
Accel 8.8mm race wire
JBA headers
hi-flow cat
Flowmaster 40

[LUNATIC13]

ummmmm....

cold air intake.......

Chris...what else is there???

[mnchvgs79]

added another mouse to spin the wheel :D



Intake
true header (stock)
2 1/4" straight through exhaust, with no cat
Motorcraft 8mm wires

thats about it, no need to waste my money when I's got's a turbo motor for the truck

[PimpinLow]

ummmmm....

cold air intake.......

Chris...what else is there???

Injen true cold air, cat back Greddy exaust, SS headers, Licence plates that read Lunatic (it makes the gas pedal go down further when its not needed :angel: ) and some hot chick drivin it all the time crossin 3 lanes at once with no turn signal :bow: :bow: (you know i l___ u)...thats abtou all i can think without actually lookin at the engine.

As for me, custom exaust with a flowmaster 40 and removed grill in the mass air. no need to mod the engine its good enuf

[W2BFSTR]

ok the things i have on my truck as of right now are-

-38mm weber downdraft
-360 air cleaner(k+n)
-k+n oil breather
-Lcengineering header
-Toyota performance coil

i have a bunch of other bol ons that i will be putting on since its going to be a few paychecks before my new engine is going to be together. ok enough rambling from me now.

[shakes]

mods...

i got stuff. but she is still slow.

[shady4evr]

thats a lie doug you scared the crap out of me a few months ago, your car is fast and it will be faster.

as for me, cold air intake, dual flow masters with turndowns, no hood fenders grill core support head lights ,parking lights, front bumper, and that is about it.

[slammed]

umm the motor in my 67 started out asa 350 2 bolt main and now is punched 60 over, ( i dont remember what compression pistons they are but they have knots on top of them lol) headers, eldobrock alum. single plane intake, holley 750 double pumper, dual elec. fans, elec. ingnition, accel coil booster thats all i can remember trans wise- T-350 shift kit and vega torque converter

dad's 68 has a 468 BB, silvo-lite pistons with ceramic skirts 10.25 comp., stock rods, stock crank,which has all been balanced, oval port heads (damn i wish we could find some square port heads) headers, high rise single plane alum. intake, holley 850 double pumper, elec. ignition, coil booster, and a rev limiter witha 7000's chip in it

the 77 has a 350 in it witha alum intake, eldobrock 600 (reliability no performance lol)
headers etc.

toyota- everything outside the motor is brand new, performance wise it has a new exhuast and i gutted the cat

the rest of are stuff is stock but there is a new LS7 BB in the corner and that ***** keeps on smiling at me

the 355 in my 67 is getting replaced witha stock yess STOCK 305 for gas mileageince i will be driving this truck everywhere my dad is getting the motor for his pro street chevy II

thats all i can think of right now

[87gn]

87 grand national:
LC2, Precision PTE44C Turbo, .80 A/R Exhaust Housing, 3.5 Inch Terry Houston Polished Stainless Steel Down Pipe, Precision Front Mount Intercooler, Lucas 42.5 lb Injectors, Poston Adjustable Fuel Pressure Regulator, Kirban Adjustable Wastegate, Kirban Breather By Pass Kit, RJC Power Plate, Walbro Dual Fuel Pumps, Hot Wire Kit, Stage 2 2004r, Shift Kit, Scanmaster V2.1, Boost and Fuel Pressure Gauges, 8.5 Inch Eaton 3.43 Posi (LSD), Jim Testa Custom Burnt Chips, Caspers Field Fix Harness, K@N Filter, Chromed MAF Pipe, Hooker Cat Back Dual Exhaust, Stright Pipes, Test Pipe, Dump, Bilstein HD Shocks, 275/60/15 BFG Comp TA Drag Radials, Ported And Polished Large Valve 25518445 Heads (TSM Style) Now Being Preped, Grill Optional.

the injectors and turbo are alittle on the small side, the turbos only a 58mm rated for 850 cfm and 580 hp. ill go bigger once i get some more cash.

[StratusFear]

2003 Dodge Stratus R/T, just got it, so i dont have any mods.

1997 Dodge Neon, K&N GenII FIPK Intake, Dynomax Super Turbo cat-back, Rockford Fostgate Head Unit, 2 Audiobahn 10" speakers, bumper torn off, sitting in my garage!!

[GoVrtcL]

2001 Ford Mustang V6:
K&N Air Filter
Removed Air Silencer
Custom Exhaust from the cats back
Cherrybomb Mufflers

[lo1dakota]

2001 3.9 v6 dakota
low temt thermostat
super homemade ghetto intake
full cat back exhaust
you can kinda count the hood cuz its an ss with and opening for better air flow

[REKER]

Robert Shaw 180 T-Stat
AutoLite 3923 plugs (colder plugs)
Homebrew Intake with K&N Filter
and a Dakota USA decal that claims to add 45.5 Hp dyno proven!!

[Brainwashed]

K&N Air Filter Whoohoooooo!

[14U2_Envy]

12 inch 64 spoke lowrider rims chrome fenders and front fork chrome sissy bar, handle bar, rear fender chain and sproket and chain gard custom blue metal flake with pearl paint and a custom lowrider plush seat! many more mods to much to list! yeah my bycicle is the sh**!!!!!!!

[ValeSyd]

Now if you could just rescue the poor thing from Culpepper.

[EvaUnit01]

Acura RSX
Shift Bushings
Tein HA coilovers
Yokohama AVS ES100 Tires
Injen SRI
magnaflow exhaust

Soon:
Type S header
Type S cat
Thermal R&D 2.5" exhaust
Jackson Racing supercharger.

[v8blazin]

added 2 more cylinders with a th350.3500 tci stall convertor.

[DrewzR/T]

-Ported and Polished 1.92 Mopar R/T heads
-Ported Mopar M1 intake manifold
-PPH mid length headers
-Carsound High flow Cat
-Flowmaster 40 series 3 in single in..2.5in dual out (soon to be spintech 3 in 3 out
dumped after the axle)
-K&N FIPK True Cold Air (Soon to be a 14x5 K&N Xtreme Air cleaner)
-180 degree stat
-MSD 8.5mm plug wires
-IAC relocated from the Intake manifold to the K&N tube
-Timing advanced about 4 degrees (cranckshaft sensor mod)

Coming soon
-B&G PCM flash
-2600 or 2800 stall (not sure yet which one I want yet)
-Crower 1.6 rockers
-220 KRC cam
-52mm F&B TB
-Functional Cowl induction hood

[MarineOneMP]

HUmm... 331, P&P gt40P heads, F303, Long tubes, Edelbrock RPM upper/lower, 3:73's, O/R H pipe, 2 chamber flows,full MSD, o yea.... and a K&N ;)

[PhantomNeon]

2.5 Flowmaster duals
Custom CAI (intake tube off a 3.0 Caravan with a filter thrown on the end)
MPx UDP
I think that's it....for now

[KurseD]

cut down the air cleaner lid for more air (nissan hardbody cai can get really costly), trashed entire A/C system (too expensive to fix all problems, a lil weight savings in return), cherry bomb muffler (cheap) gutted cat, swapped in a 5 speed in place of stock auto, and a voodoo go fast spell... :scratch: doesnt seem like alot till you consider the thing picked up 2 seconds in the 8th mile... i couldnt believe that one myself

[NOVA50]

Hey new guy here figured id post my mods first.

88 mustang 60-1 hifi single turbo, msd 6al, adj. boost controller, and fiberglass unpainted cobra-r hood. Hopefully go with a stronger block and twins in the future.

[MsBowtie]

SLP air lid
Loud Mouth exhaust

[Cobra4B]

Vortex CAI, Kooks LT headers w/ hi-flo cats, Borla Stinger Catback

[ShortyzKustomz]

Uhmm lets see,
In the Camaro... 78' 350 4 block from a truck, bored .30 over, ported 2.02, 1.60 heads, Edelbrock intake Rochester 730 cfm carb, K&N drop base air cleaner, Headman jet hot coated headers, 3 inch mandel bent exhuast with Catco cat and dyomax bullet muffler with 3.5 inch magnaflow tips, Built Th-350 with shift kit, 3.73 posi

In the Isuzu... Hole in exhuast

[14U2_Envy]

ok so finaly i get to list the mods not on ma bike but on the car, nuespeed springs,kyb struts, nuespeed upper front/rear strut bar weapon r intake, k&N filter the rest cosmetics, dc sport shifter knob, pedals, and a system i have but i wont list what it consits of it hits though!!! still plenty more to come! as for tyhe bike got new chrome crank and chrome side mirrors chain steering wheel and new plush seat coming sometime!

[slammed]

^whats all that stuff on?^

[Tacoma-Srunner]

some have already read on what i have.. but i'll be einstein for a minute..

EATON M62 Roots Type Supercharger with Magnuson Case designed for TRD.

http://www.automotive.eaton.com/product/engine_controls/superchargers/M62.asp

http://www.magnusonproducts.com/superchargers.htm

EATON Limited Slip Differential for the rear.


For the retarded:

BOOST AND BOTH WHEELS SPIN.

[14U2_Envy]

^whats all that stuff on?^




honda civic! and lowrider bike that matches car!

[k20hatch]

Performance:
Rev Hard T3T4 Turbo Kit
Rev Hard Intercooler
Vortech Blow Off Vavle
Hondata Flash re-tune
GReddy Turbo Timer
DNX Full Exhuast
Nitrous Express Kit
Nos Purge Kit "Not really performance"

[fokuzsport]

My performance mods-
JBA shorty header
R/T highflow cat
Focussport Flex pipe
Focussport stealth exhaust cat back
Volant intake
Ported throttle body
Ported intake manifold
9mm steeda wires with 150 ohm rating
Diablo delta chip with 2 progams
FC 2 peice under drive pulley kit



Going on soon-
FC cam gear set
Crane stage 2 cams
Tranny upgrade
Then tuning.

[TeayotaSoupra]

HPF Clutch with RPS pressure plate (6 puc)
KYB Struts
Eibach pro springs
Magnacore wires (if you knew how expencive these ****ers were you'd list them too)
NGK Iridium spark plugs (again..up top)
Sparco suede steering wheel (pimp factor)
Enkei RP01 18" wheels
Kum-ho esca Supra tires (245/40/18) with the special slick tread on the inner rear tires thanks to Firestones "alignment" right before I put the tires on

I have put so much money into tuning up the car..the performance in min...BUT.. the only fluid left to change in this car is the brake fluid..and the only gasket left to replace is the rear main seal.. WOOT!! ;) oh and I need new mouldings for the targa top so it'll stop leaking.. then it's TT brakes and TURBO! werd... oh.. and some new tires.. 275 in the rear.. and not kum-hos..

[brewthru85]

Sparco suede steering wheel (pimp factor)
Enkei RP01 18" wheels
Kum-ho esca Supra tires (245/40/18) with the special slick tread on the inner rear tires thanks to Firestones "alignment" right before I put the tires on

how are these performance mods?

[TeayotaSoupra]

how are these performance mods?
#1 I was being a smart ass..

#2 If you want to count fiberglass hoods as a performance mod I can count wheels that are lighter in wight

#3 We all know suede gives better handeling because you can uhm grip it better.... and again.. it's the pimp factor..


How is a shift knob considerd a performance mod? weighted? Not going to do anything for your car.. more for you...
How is a purge kit a performance mod (It's not ran into the actual engine)

Why pick on what I say and not everyone else?

[fokuzsport]

Performance:
Rev Hard T3T4 Turbo Kit
Rev Hard Intercooler
Vortech Blow Off Vavle
Hondata Flash re-tune
GReddy Turbo Timer
DNX Full Exhuast
Nitrous Express Kit
Nos Purge Kit "Not really performance"
so NICE

What do you have at the wheels?

[Goat]

Rubber tires probably.

[b_ryte_back]

Moder Performance 60mm-Bob Stockum PnP INtake Mani-FastFabs Long Tube Header-Borla Proxs-srt pumps-srt cams-srt pistons-Forward Motion Turbo 2.5 Rods-VCN 1000 bout it right now...i miss my old setup...oh and the motor swap

[Goat]

I've changed the oil AND the oil filter TWICE!!! Recognize Sucka!!

Plus i have a custom fabricated VAC window sticker.

What up now???

The sticker adds a million frazillion horsepower and torque to the wheels.

[blount99rt]

hmmm... Well I can tell ya what I can see, since Ive only had it for 2 weeks.

1999 Dodge Dakota R/T Reg Cab

1.K&N filter(whoopty do)
2.Ported TB
3.Relocated IAT sensor
4.Unknown transmission shift kit(shifts wayyy better than a stock RT should)
5.Flo masta muff dumped under bed
6. Two inch dropped suspension (dont handle like no truck)
7. Unknown brand crossdrilled rotors out front.

Only mod I did so far was install the 40 series flowmaster. The rest was already on it when I bought it. Almost forgot, I took the V8 badges off the front fenders:D

[lownloud_chevy]

94' Silverado
5.7 (350) TBI
4L60E
homemade intake
K&N air filter
transmission cooler
enhancement chip
Flowmaster "40" series daul chamber cat back
10-bolt rearend with 3.73 gears.

any questions email me at lownloud_chevy@yahoo.com

[vortech03]

2003 Chevy S10
4.3L with auto tranny 3.42 gears
1.Port and polished heads
2.Comp cams custom regrind
3.Compcams valve springs
4.Compcams rockers
5.K&N Air Filter
6.JBA headers
7.Custom Y pipe
8.Flowmaster 40
9.Crane Cams HI-6R ignition and coil
10.PCM for less reflash
11.Corvette servo
12.160 Degree Thermostat
13.Vortech V-1S Supercharger @ 12psig
- still working on the intercooler

[k20hatch]

so NICE

What do you have at the wheels?

266whp...at 6psi

[s10lwrider]

2000 s-10 2.2
Gibson Catback, Cold Air Intake, Electric Fan.
Next mod is a v-8

[BoostError]

1996 Tacoma SX 2.4L
Custom built CAI
No cat
2.5" header-back, Flowmaster 40, dump before the axle (aka loud as FAWK)
Throttle body spacer

Coming in 2005:
URD-Built and tuned turbo setup:
t3/t4 hybrid water-cooled turbo
Custom manifold
Walbro 190lph HP pump
440lb injectors
Fully tuned and tweaked by www.urdusa.com
ARP head studs
LCE metal head gasket

Looking for 14-18lbs of boost to start, daily driven.
Ultimate goal 300rwhp with more boost and P&P head + cryoed internals.

Suspension:
Eibach 1" front drop springs
Flipped front upper/lower ball joints (3.5" drop)
4" blocks in the rear
KYB Gas-A-Just shocks
39mm WS6 rear sway bar (pending)
ADDCO front sway bar (pending)
C-notched rear frame so I can drift w/o bottoming out on it (pending)

[Stangsta]

Mine are listed here:

http://www.sevencityracing.com/forum/vbgarage.php?do=view&id=1

[STKHATCH]

1990 honda civic
1995 d16z6 vtec bock
1998 d16y8 JDM head
1998 d16y8 intake manifold
1995 OBD-1 Vtec distributor
HP race header
RS*R ex mag cat back exhaust
No Name cold air intake
LOCASH obd0-obd1 conversion harness
LOCASH obd0-obd1 distribuor conversion harness
LOCASH Vtec engine subharness
Skunk2 dual bend short shifter
skunk2 1 pound shift knob