Is this ok to do?

[phigity]

i have 2 viair 450's, 2 5 gallon tanks, and 2 150psi pressure switches. i have been wanting to go with more psi. i was looking on http://www.innovativeairsuspension.com and saw some 175psi switches for $20 a piece. the viair 450's are only 150 psi comps. can i still run the 175 psi switches? i want some more are in the tanks and also a little faster lift. what is the max psi i can run with the 450's? thanks for the help?

[mnchvgs79]

Will it work? YES
Is it good for your compressors? NO
Does it void the warranty? YES
Do I recommend it? NO
You dont need to pressure switches just so you know, all you need is one to turn on the solenoid (high powered relay) that runs your compressors. What are the specs on your suspension? bags, cylinders, line size, valve size etc... we could give you better recommendations to make it faster easier if we know what you are working with.

I personally have (1) 5 gallon tank, (2) 450 compressors 3/8" stainless hardline and would still like mine to be slower going up and the rear a bit slower going down.

[SicS15]

yeah, only need 1 pressure switch....you can, but you will burn those viairs up eventually (probably sooner than later) and they won't be under warranty like adam said....if you want faster lift, I would be looking at swapping valves or line size!!! Contact Larry at innovative, hes the man and has helped me out on numerous occassions...Lata Jack

[fi istaylo]

i got a 175 pressure switch ill sell u for $10...never used...got a adj. p/s instead...and i think the 450s warranty is void if u take it over...175 i think...not sure...but give jason@suicidedoors a call...1-812-782-3581

[incudose]

yeah it does void the warranty, but if anything ever happens, you can take it to Matt @ guage and he'll hook you up...as i understand, he just keeps a bunch of warranty forms and gets new ones anyways...and he doesnt care about the psi as long as its not like 200 oh and mike, talk to me about this 175 switch that you got...

[phigity]

[QUOTE=mnchvgs79]What are the specs on your suspension? bags, cylinders, line size, valve size etc... we could give you better recommendations to make it faster easier if we know what you are working with.[QUOTE]

not sure on what psi or size the bags are but they have 3/8" ports i believe. 1/2" line, 1/2" GC valves, 150 psi p/s, 2 viair 450's, 2 5 gallon tanks. hope that helps.